Thank you for choosing this DOGTEK product.
Before using the BC-60 Bark-Control collar, please read this user’s guide carefully,
and keep it in a safe place.
w w w . D O G T E K . c o m
Helpfull advice
The owner’s involvement during the first use of the product
is a key factor in obtaining the best results.
Do not leave your dog unattended with the collar on
until he is accustomed to wearing
it and you are satisfied that it is working correctly. You should ensure that the settings
(barking detection sensitivity / operating mode)
are adjusted correctly for your dog
.
Closely monitor your pet during the first few days of use.
When your dog is barking, let the collar operate without interference. Any interference on your
part could be taken as a sign of acknowledgment; consequently the barking would become an
effective mean to attract your attention.
As soon as your dog stops barking, congratulate him (
but not excessively
) by petting him,
verbally praising him, or giving him a small treat to encourage his good behavior.
Remember that barking can indicate some behavioral problems. This bark control collar will
allow you to minimize excessive barking.
Description of tHe proDuct
Diagram 1
STimulaTiOnS OFF
(bEEp SOunDS OnlY)
ShOrT
STimulaTiOnS
lOnG
STimulaTiOnS
STimulaTiOn
SwiTch
barKinG
DETEcTiOn
cOnTacT pOinT
On
OFF
On/OFF SwiTch
ShOrT Or lOnG
cOnTacT pOinT
STrap
ScrEwDrivEr
SETTinGS
SETTinGS
cOvEr #2
SETTinGS
cOvEr #1
cOvEr
barKinG DETEcTiOn
cOnTacT pOinT
Diagram 2
barK SEnSOr aDjuSTmEnT ScrEw:
Turn clOcKwiSE TO incrEaSE ThE SEnSiTiviTY OF ThE barK SEnSOr anD
cOunTEr clOcKwiSE TO DEcrEaSE iT
pLeAse note
In the factory, the On/Off
switch is positioned on Off;
the stimulation switch is
positioned on “beep sounds
only”
and the barking detec-
tion sensitivity setting is in the
middle position.
pAckAge contents
BC-60 collar equipped
with short contact
points, a nylon strap and
a lithium 3 Volt CR123A
battery
Neon test lamp
Pair of long contact
points
Screwdriver
User’s guide
3
4
