DOGA DPTC Series, Instruction Manual

Page: 4 / 28

Instructions manual / DPTC Series 4
WARNING!
“
READ ALL INSTRUCTIONS
”
Always observe the safety regulations applicable in
your country to reduce the risk of fire, electric shock and personal injury. Understand the following safety
instructions before attempting to operate this product. Always wear eye protection when working with
power tools.
Keep these instructions in a safe place.
SAVE THESE INSTRUCTIONS
1
GENERAL SAFETY RULES
1.1 Work Area Safety
⚫
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
⚫
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or
fumes.
⚫
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control.
1.2 Personal Safety
⚫
Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use tool while tired or under the influence of drugs, alcohol, or
medication.
A moment of inattention while operating power tools may result in serious
personal injury.
⚫
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your
hair, clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair
can be caught in moving parts.
⚫
Do not overreach. Keep proper footing and balance at all times. Proper footing and
balance enable better control on the tool in unexpected situations.
⚫
Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes,
hard hat, or hearing protection must be used for appropriate conditions.
1.3 Tool Use and Care
⚫
Use clamps or other practical ways to secure and support the work piece to a stable
platform.
Holding the work piece by hand or against your body is unstable and may lead to
loss of control.
⚫
Do not force tools. Use the correct tool for your application. The correct tool will do the
job better and safer at the rate for which it is designed.
⚫
Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled
with the switch is dangerous and must be repaired.
⚫
Store idle tools out of reach of children and other untrained persons. Tools are
dangerous in the hands of untrained users.
⚫
Check for misalignment or binding of moving parts, breakage of parts, and any other
condition that may affect the tool operation. If damaged, have the tool serviced before
using.
Many accidents are caused by poorly maintained tools.
⚫
Use only accessories that are recommended by the manufacture for your model.
Accessories that may be suitable for one tool, may become hazardous when used on
another tool.