DOGA BMT Series, Instruction Manual

Page: 26 / 68

Manual transducerized BMT series DOC.60425-05/21 24
Target angle
Unit Range Initial
degree 0 ~ 20000 0
Description Target angle in AC/TM mode
Min angle
Unit Range Initial
degree 0 ~ 20000 0
Description Minimum angle to be OK in TC/AM and AC/TM mode
Max angle
Unit Range Initial
degree 0 ~ 20000 0
Description Maximum angle to be OK in TC/AM and AC/TM mode
Angle for free speed
Unit Range Initial
degree 0 ~ 20000 0
Description Angle for Free speed
Free speed
Unit Range Initial
rpm Tool range 0
Description
Manual setting speed. Shift back to the auto speed after the free angle running
Soft start
Unit Range Initial
msec 0 ~ 300 0
Description Speed reach to the target in the setting time, Preset complement to acceleration
controller parameter
Seating point torque (%)
Unit Range Initial
% 10 ~ 95 50
Description In TC/AM : % of Target torque
Auto speed slow down to ramp-up speed for torque control
In AC/TM : to be set with same torque value as Snug torque,in % of Max torque
Torque rising time
Unit Range Initial
msec 50 ~ 200 50
Description Time setting from seating point to the target