Page 4
packaging! Any other deliveries will be rejected. Therefore, you should keep the original
packaging and the technical documentation.
Attention:
In each electronic device there is some chance of data corruption (e.g. because of an EMC
disturbance). . In most cases a data corruption happens only once and it is not possible to
our find the reason. As mentioned above mostly nonrecurring EMC disturbances (e.g.
transients in the mains power supply) cause such data corruption and there is no way no
chance to protect oneself from them - except the data copy via SysEx.
This is why you should make a copy of all data now and then for the safety of your data.
Same is valid for the MAQ data too. For this purpose the MAQ has the dump feature that
enables to store your preset data via MIDI SysEx messages e.g. to a computer or MIDI
recording device. (APPENDIX A).
Also an backup could be very useful, if you delete or overwrite a preset by mistake.
When using the instrument in Germany, the appropriate VDE standards must be followed.
The following standards are of special importance: DIN VDE 0100 (Teil 300/11.85, Teil
410/11.83, Teil 481/10.87), DIN VDE 0532 (Teil 1/03.82), DIN VDE 0550 (Teil 1/12.69), DIN
VDE 0551 (05.72), DIN VDE 0551e (06.75), DIN VDE 0700 (Teil 1/02.81, Teil 207/10.82),
DIN VDE 0711 (Teil 500/10.89), DIN VDE 0860 (05.89), DIN VDE 0869 (01.85). VDE papers
can be obtained from the VDE-Verlag GmbH, Berlin.
Technical specifications are subject to change without notice.
