Dodge Viper 2017, Operating Information Manual

Page: 50 / 389

Recliner Adjustment
The recliner lever is located on the outboard
side of the seat. To recline the seat, lean forward
slightly, pull the recliner lever upward, lean
backward until the seat is in the desired position,
and release the lever. To return the seat to its full
upright position, lean forward, pull the recliner
lever upward and hold it until the seat returns to
its full upright position.
WARNING!
•
Adjusting a seat while driving may be dan-
gerous. Moving a seat while driving could
result in loss of control which could cause a
collision and serious injury or death.
(Continued)
WARNING! (Continued)
•
Seats should be adjusted before fastening
the seat belts and while the vehicle is
parked. Serious injury or death could result
from a poorly adjusted seat belt.
•
Do not ride with the seatback reclined so
that the shoulder belt is no longer resting
against your chest. In a collision, you could
slide under the seat belt, which could result
in serious injury or death.
Power Seats
On models equipped with power seats, the
power seat switch is located on the outboard
side of the seat near the floor.
Adjusting The Seat Forward Or Rearward
The seat can be adjusted both forward and
rearward. Push the seat switch forward or rear-
ward. The seat will move in the direction of the
switch. Release the switch when the desired
position has been reached.
Adjusting The Seat Up Or Down
The height of the seats can be adjusted up or
down. Pull upward or push downward on the
seat switch, the seat will move in the direction of
the switch. Release the switch when the desired
position is reached.
Reclining The Seatback Forward Or
Rearward
The seatback can be reclined both forward and
rearward. Push the power seat recliner switch
forward or rearward, the seatback will move in
the direction of the switch. Release the switch
when the desired position has been reached.
Recline Lever
Power Seat Switch
Power Seat Recliner Switch
47