Dodge Viper 2017, Operating Information Manual

Page: 39 / 389

around the child restraint so that it is not neces-
sary to use a locking clip. The ALR retractor can
be “switched” into a locked mode by pulling all of
the webbing out of the retractor and then letting
the webbing retract back into the retractor. If it is
locked, the ALR will make a clicking noise while
the webbing is pulled back into the retractor.
Refer to the “Automatic Locking Mode” descrip-
tion in “Switchable Automatic Locking Retrac-
tors (ALR)” under “Occupant Restraint Systems”
for additional information on ALR.
Please see the table below and the following
sections for more information.
Lap/Shoulder Belt Systems For Installing
Child Restraints In This Vehicle
Frequently Asked Questions about installing child restraints with seat belts
What is the weight limit (child’s weight
of the child restraint) for using the Tether An-
chor with the seat belt to attach a forward fac-
ing child restraint?
Weight limit of the Child Restraint
Always use the tether anchor when using the
seat belt to install a forward facing child re-
straint, up to the recommended weight limit of
the child restraint.
Can the head restraints be removed? No
Can the buckle stalk be twisted to tighten the
seat belt against the belt path of the child re-
straint?
No
Automatic Locking Retractor (ALR) Locations
•
ALR = Switchable Automatic Locking Retractor
•
Top Tether Anchorage Symbol
36