The power window switches will remain active
for up to 10 minutes after the ignition is cycled to
the OFF position. Opening either front door will
cancel this feature. The time is programmable.
Refer to “Uconnect Settings” in “Understanding
Your Instrument Panel” for further information.
WARNING!
Never leave children unattended in a vehicle,
and do not let children play with power win-
dows. Do not leave the key fob in or near the
vehicle, or in a location accessible to chil-
dren, and do not leave the ignition of a
vehicle equipped with Keyless Enter-N-Go in
the ACC or ON/RUN mode. Occupants, par-
ticularly unattended children, can become
entrapped by the windows while operating
the power window switches. Such entrap-
ment may result in serious injury or death.
Auto-Down Feature
Both power window switches have an Auto-
Down feature. Push the window switch to the
second detent, release, and the window will go
down automatically.
To open the window part way, push the window
switch to the first detent and release it when you
want the window to stop.
To stop the window from going all the way down
during the Auto-Down operation, pull up on the
switch briefly.
Auto-Up Feature With Anti-Pinch
Protection
Lift the window switch to the second detent,
release, and the window will go up automatically.
To stop the window from going all the way up
during the auto-up operation, push down on the
switch briefly.
To close the window part way, lift the window
switch to the first detent, and release it when
you want the window to stop.
NOTE:
•
If the window runs into any obstacle dur-
ing auto-closure, it will reverse direction
and then go back down. Remove the ob-
stacle and use the window switch again to
close the window.
•
Any impact due to rough road conditions
may trigger the auto-reverse function un-
expectedly during auto-closure. If this
happens, pull the switch lightly to the first
detent and hold to close the window
manually.
•
If the window detects an obstacle 10 times
in a row, the auto–up feature unlearns.
WARNING!
There is no anti-pinch protection when the
window is almost closed. Be sure to clear all
objects from the window before closing.
Reset Auto-Up
Should the Auto-Up feature stop working, the
window may need to be reset. To reset Auto-Up:
1. Make sure the door is fully closed.
2. Pull the window switch up to close the win-
dow completely and continue to hold the
switch up for an additional two seconds after
the window is closed.
3. Push the window switch down firmly to the
second detent to open the window com-
pletely and continue to hold the switch down
for an additional two seconds after the win-
dow is fully open.
LIFTGATE
Prior to opening, the liftgate can be unlocked by
using the key fob, the manual lock cylinder
located on the rear panel with use of the me-
chanical “emergency” key, or by activating either
of the power door lock switches located on the
door trim panels.
15
Summary of Contents for Viper 2017
