manualshive.com logo in svg

Dodge Ram Power Wagon, Owner'S Manual

The Dodge Ram Power Wagon owner's manual is essential for getting the most out of your powerful truck. Download the manual for free from our website to learn everything you need to know about your vehicle, including maintenance, operation, and safety guidelines. Get your manual today and hit the road with confidence.

Share
Download
background image

Gross Trailer Weight (GTW)

The gross trailer weight (GTW) is the weight of the trailer
plus the weight of all cargo, consumables and equipment
(permanent or temporary) loaded in or on the trailer in its

⬙

loaded and ready for operation

⬙

condition. The recom-

mended way to measure GTW is to put your fully loaded
trailer on a vehicle scale. The entire weight of the trailer
must be supported by the scale.

Gross Combination Weight Rating (GCWR)

The gross combination weight rating (GCWR) is the total
permissible weight of your vehicle and trailer when
weighed in combination. (Note that GCWR ratings in-
clude a 68 kg (150 lbs) allowance for the presence of a
driver).

Gross Axle Weight Rating (GAWR)

The GAWR is the maximum capacity of the front and rear
axles. Distribute the load over the front and rear axles
evenly. Make sure that you do not exceed either front or
rear GAWR.

WARNING!

It is important that you do not exceed the maximum
front or rear GAWR. A dangerous driving condition
can result if either rating is exceeded. You could lose
control of the vehicle and have an accident.

Tongue Weight (TW)

The downward force exerted on the hitch ball by the
trailer. In most cases it should not be less than 10% or
more than 15% of the trailer load. You must consider this
as part of the load on your vehicle.

328

STARTING AND OPERATING

Summary of Contents for Ram Power Wagon




















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Ram Power Wagon

Camcar 2155 Fitting Instructions preview
2155
Brand: Camcar Pages: 2
RAM 2015 1500 User Manual preview
2015 1500
Brand: RAM Pages: 292
RAM Trucks 1500 User Manual preview
Trucks 1500
Brand: RAM Pages: 116
PUTCO MOLLE PANELS RAM 2500 Instruction Manual preview
MOLLE PANELS RAM 2500
Brand: PUTCO Pages: 4
Westfalia Portilo 350000 Installation And Operating Instructions Manual preview
Portilo 350000
Brand: Westfalia Pages: 18
Tessera4x4 SOT-1311 ROLL Installation Manual preview
SOT-1311 ROLL
Brand: Tessera4x4 Pages: 20
WABCO TP19108 Installation Manual preview
TP19108
Brand: WABCO Pages: 32
Metra Electronics 95-8202 Installation Instructions Manual preview
95-8202
Brand: Metra Electronics Pages: 20
Parkeon StradaPAL Installation Manual preview
StradaPAL
Brand: Parkeon Pages: 43
CTEK D250S Dual Manual preview
D250S Dual
Brand: CTEK Pages: 84
Subaru Impreza 2.5GT Specifications preview
Impreza 2.5GT
Brand: Subaru Pages: 2
Subaru 1999 Impreza Owner'S Manual preview
1999 Impreza
Brand: Subaru Pages: 328
Quadratec 12057.0263 Installation Manual preview
12057.0263
Brand: Quadratec Pages: 12
Scion 2012 iQ Quick Reference Manual preview
2012 iQ
Brand: Scion Pages: 24
Acura 08L03-TA1-200A Installation Instructions preview
08L03-TA1-200A
Brand: Acura Pages: 4
Scion 2013 iQ Warranty & Maintenance Manual preview
2013 iQ
Brand: Scion Pages: 58
RAM TRUCK 2500 2017 Owner'S Manual Supplement preview
TRUCK 2500 2017
Brand: RAM Pages: 33
Kargo Master PRO-II KS Assembly Instructions Manual preview
PRO-II KS
Brand: Kargo Master Pages: 8

Brands by name

Popular brands

Load more brands