Dodge Ram Power Wagon Owner'S Manual Download Page 84

Page: 84 / 467

•

Off-Road Tuned Suspension And Shocks - improves
mobility, ground clearance and ride comfort.

•

Heavy Duty Thermally Protected and Sealed Electric
Winch With Roller Fairlead - Useful for work and
vehicle recovery.

•

17 Inch Forged Aluminum Wheels With 33 Inch Tires
- improves traction and differential ground clearance.

Mopar Options:

•

Rock Rails - protects the door sills from impingement
damage and provides a vehicle jacking point.

•

Winch accessory kit - Contents include:

•

Snatch Block/Pulley

•

Clevis

•

Tree strap

•

Tow Strap

•

Gloves

•

“Power Wagon embossed” storage bag

•

Bed Liner - protects the bed from impingement dam-
age

NOTE:

These Mopar options have been specially de-

signed and tested for the Power Wagon to meet the
vigorous off-road conditions.

MIRRORS

Inside Mirror

The mirror should be adjusted to center on the view
through the rear window.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for Ram Power Wagon




















































































































































































































































































































































































































































































Search results

Summary of Contents for Ram Power Wagon

Reviews:

Related manuals for Ram Power Wagon

Brands by name

Popular brands

Dodge Ram Power Wagon, Owner'S Manual

Search results

Summary of Contents for Ram Power Wagon

Reviews:

Related manuals for Ram Power Wagon

Brands by name

Popular brands