Dodge Challenger 2015, Operating Information Manual

Page: 98 / 689

•
The system disengages. (Refer to the infor-
mation on ACC Activation).
The maximum braking applied by ACC is lim-
ited; however, the driver can always apply the
brakes manually, if necessary.
NOTE:
The brake lights will illuminate whenever the
ACC system applies the brakes.
A Proximity Warning will alert the driver if ACC
predicts that its maximum braking level is not
sufficient to maintain the set distance. If this
occurs, a visual alert “BRAKE” will flash in the
DID and a chime will sound while ACC contin-
ues to apply its maximum braking capacity.
NOTE:
The “Brake!” Screen in the DID is a warning
for the driver to take action and does not
necessarily mean that the Forward Collision
Warning system is applying the brakes au-
tonomously.
Overtake Aid
When driving with ACC engaged and following
a target vehicle, the system will provide an
additional acceleration to assist in passing ve-
hicles in front. This additional acceleration is
triggered when the driver utilizes the left turn
signal. In locations with left hand drive traffic,
Overtake Aid is active only when passing on the
left hand side of the Target vehicles.
When a vehicle goes from a location with left
hand drive traffic to a location with right hand
drive traffic, the ACC system will automatically
detect traffic direction. In this condition, Over-
take Aid is active only when passing on the right
side of the Target vehicle. This additional accel-
eration is triggered when the driver utilizes the
right turn signal. In this condition the ACC
system will no longer provide Overtake Aid on
the left side until it determines that the vehicle
has moved back to a location with left hand
drive traffic.
Adaptive Cruise Control (ACC) Menu
The DID displays the current ACC system set-
tings. The DID is located in the center of the
instrument cluster. The information it displays
depends on ACC system status.
Brake Alert
95