Dodge Avenger Owner'S Manual Download Page 35

Page: 35 / 514

Auto Unlock On Exit Programming

The Automatic Unlock Doors On Exit feature can be
enabled or disabled as follows:

•

For vehicles equipped with the Electronic Vehicle
Information Center (EVIC), refer to “Electronic Vehicle
Information

Center

(EVIC)/Personal

Settings

(Customer-Programmable Features)” in “Understand-
ing Your Instrument Panel” for further information.

•

For vehicles not equipped with the EVIC, perform the
following procedure:

1. Close all doors and place the key in the ignition.

2. Cycle the ignition switch between LOCK and ON/
RUN and then back to LOCK four times, ending up in the
LOCK position.

3. Press the power door unlock switch to unlock the
doors.

4. A single chime will indicate the completion of the
programming.

5. Repeat these steps if you want to return this feature to
its previous setting.

NOTE:

Use the Automatic Unlock Doors On Exit feature

in accordance with local laws.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for Avenger



































































































































































































































































































































































































































































































































Search results

Summary of Contents for Avenger

Reviews:

Related manuals for Avenger

Brands by name

Popular brands

Dodge Avenger, Owner'S Manual

Search results

Summary of Contents for Avenger

Reviews:

Related manuals for Avenger

Brands by name

Popular brands