Dodge Avenger Owner'S Manual Download Page 124

Page: 124 / 514

Send Messages:

You can send messages using Uconnect™ Phone. To send
a new message:

•

Press the

button.

•

After the “Ready” prompt and the following beep, say
“SMS Send” or “Send Message.”

•

You can either say the message you wish to send or say
“List Messages.” There are 20 preset messages.

To send a message, press the

button while the

system is listing the message and say “Send.”

Uconnect™ Phone will prompt you to say the name or
number of the person you wish to send the message to.

List of Preset Messages:

1. Yes

2. No

3. Where are you?

4. I need more direction.

5. L O L

6. Why

7. I love you

8. Call me

9. Call me later

10. Thanks

11. See You in 15 minutes

12. I am on my way

122

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for Avenger



































































































































































































































































































































































































































































































































Search results

Summary of Contents for Avenger

Reviews:

Related manuals for Avenger

Brands by name

Popular brands

Dodge Avenger, Owner'S Manual

Search results

Summary of Contents for Avenger

Reviews:

Related manuals for Avenger

Brands by name

Popular brands