Dodge Avenger Owner'S Manual Download Page 231

Page: 231 / 514

SETUP Button

Pressing the SETUP button allows you to select between
the following items:

NOTE:

Turn the TUNE/SCROLL control knob to scroll

through the entries. Push the AUDIO/SELECT button to
select an entry and make changes.

•

DVD Enter -

When the disc is in DVD Menu mode,

selecting DVD Enter will allow you to play the current
highlighted selection. Use the remote control to scroll
up and down the menu (if equipped).

•

DISC Play/Pause -

You can toggle between

playing the DVD and pausing the DVD by
pushing the SELECT button (if equipped).

•

DVD Play Options -

Selecting the DVD Play Options

will display the following:

•

Subtitle – Repeatedly pressing SELECT will switch
subtitles to different subtitle languages that are
available on the disc (if equipped).

•

Audio Stream – Repeatedly pressing SELECT will
switch to different audio languages (if supported on
the disc) (if equipped).

•

Angle – Repeatedly pressing SELECT will change
the viewing angle if supported by the DVD disc (if
equipped).

NOTE:

•

The available selections for each of the above entries
varies depending upon the disc.

•

These selections can only be made while playing a
DVD.

UNDERSTANDING YOUR INSTRUMENT PANEL

229

Summary of Contents for Avenger



































































































































































































































































































































































































































































































































Search results

Summary of Contents for Avenger

Reviews:

Related manuals for Avenger

Brands by name

Popular brands

Dodge Avenger, Owner'S Manual

Search results

Summary of Contents for Avenger

Reviews:

Related manuals for Avenger

Brands by name

Popular brands