Dodge 2016 Dart Owner'S Manual Download Page 367

Page: 367 / 691

3. Turn the ignition switch to the OFF/LOCK position.

Using The DID Menu

Vehicles Equipped With Passive Entry

•

Without pushing the brake pedal, push the ENGINE
START/STOP button and cycle the ignition to the
ON/RUN position (Do not start the engine.)

•

Push and release the

DOWN

arrow

button to scroll through the main menu to “Vehicle
Info.”

•

Push and release the

RIGHT

arrow button to

access the ”Oil Life” screen.

•

Push and hold the

RIGHT

arrow button for one

second to reset the gauge and numeric display to
100% for ”Oil Life.”

•

Push and release the

DOWN

arrow

button to exit the DID screen.

Vehicles Not Equipped With Passive Entry

•

Turn the ignition switch to the ON/RUN position (do
not start the engine).

•

Push and release the

DOWN

arrow

button to scroll through the main menu to “Vehicle
Info.”

•

Push and release the

RIGHT

arrow button to

access the ”Oil Life” screen.

•

Push and hold the

RIGHT

arrow button for one

second to reset the gauge and numeric display to
100% for ”Oil Life.”

•

Push and release the

DOWN

arrow

button to exit the DID screen.

NOTE:

If the indicator message illuminates when you

start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.

UNDERSTANDING YOUR INSTRUMENT PANEL

365

Summary of Contents for 2016 Dart




















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2016 Dart

Reviews:

Related manuals for 2016 Dart

Brands by name

Popular brands

Dodge 2016 Dart, Owner'S Manual

Search results

Summary of Contents for 2016 Dart

Reviews:

Related manuals for 2016 Dart

Brands by name

Popular brands