Dodge 2016 Dart Owner'S Manual Download Page 109

Page: 109 / 691

What is the weight limit (child’s

weight of the child

restraint) for using the Tether An-

chor with the seat belt to attach a

forward facing child restraint?

Weight limit of the Child Restraint

Always use the tether anchor when

using the seat belt to install a

forward facing child restraint, up

to the recommended weight limit

of the child restraint.

Can the rear-facing child restraint

touch the back of the front

passenger seat?

Yes

Contact between the front passen-

ger seat and the child restraint is

allowed, if the child restraint

manufacturer also allows contact.

Can the head restraints be

removed?

Yes

All head restraints may be

removed.

Can the buckle stalk be twisted to

tighten the seat belt against the belt

path of the child restraint?

Do not twist the buckle stalk in a

seating position with an ALR

retractor.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

107

Summary of Contents for 2016 Dart




















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2016 Dart

Reviews:

Related manuals for 2016 Dart

Brands by name

Popular brands

Dodge 2016 Dart, Owner'S Manual

Search results

Summary of Contents for 2016 Dart

Reviews:

Related manuals for 2016 Dart

Brands by name

Popular brands