Dodge 2016 Challenger Hellcat Owner'S Manual Download Page 536 | Manualshive

Page: 536 / 622

background image

CAUTION!

(Continued)

•

Do not use water alone or alcohol-based engine
coolant (antifreeze) products. Do not use additional
rust inhibitors or antirust products, as they may not
be compatible with the engine coolant and may
plug the radiator.

•

This vehicle has not been designed for use with
propylene glycol-based engine coolant (antifreeze).
Use of propylene glycol-based engine coolant (an-
tifreeze) is not recommended.

Adding Coolant

Your vehicle has been built with an improved engine
coolant (OAT coolant conforming to MS.90032) that
allows extended maintenance intervals. This engine
coolant (antifreeze) can be used up to ten years or
150,000 miles (240,000 km) before replacement. To pre-
vent reducing this extended maintenance period, it is

important that you use the same engine coolant (OAT
coolant conforming to MS.90032) throughout the life of
your vehicle.

Please review these recommendations for using Organic
Additive Technology (OAT) engine coolant (antifreeze)
that meets the requirements of FCA Material Standard
MS.90032. When adding engine coolant (antifreeze):

•

We recommend using MOPAR Antifreeze/Coolant
10 Year/150,000 Mile Formula OAT (Organic Additive
Technology) that meets the requirements of FCA Ma-
terial Standard MS.90032.

•

Mix a minimum solution of 50% OAT engine coolant
that meets the requirements of FCA Material Standard
MS.90032 and distilled water. Use higher concentra-
tions (not to exceed 70%) if temperatures below −34°F
(−37°C) are anticipated. Please contact your authorized
dealer for assistance.

534

MAINTAINING YOUR VEHICLE

«
...
534
535
536
537
538
...
»

Summary of Contents for 2016 Challenger Hellcat















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 Challenger Hellcat

Brand: ZAPTEC Pages: 240

Brand: Metra Electronics Pages: 14

Brand: LAS Pages: 44

Brand: LAS Pages: 24

Brand: RAM Pages: 116

SmartShot Automatic 12V 1.5 Amp 5 Stage

Brand: Yuasa Pages: 44

Brand: U.S. General Pages: 4

FlashLogic FLC-FORS-FO1B-FLRSFO1-EN

Brand: ADS Pages: 25

Brand: Buick Pages: 161

Brand: Aries Pages: 3

Brand: TATA Motors Pages: 232

Brand: Honda Pages: 4

Brand: Pet Gear Pages: 4

Brand: Prime Design Pages: 12

Brand: Kolpin Pages: 6

Brand: APS Pages: 4

Brand: TracRac Pages: 6

Brand: Mercedes-Benz Pages: 66

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands