Dodge 2016 Challenger Hellcat, Owner'S Manual

Page: 406 / 622

•
VALET MODE — To enter this mode the operator
must select it from the Drive Modes interface and enter
a four digit PIN code. The PIN code is not predeter-
mined, so the operator is free to select any four digit
numeric combination that will be easy to remember.
While in Valet Mode the following vehicle configura-
tions are set and locked to prevent unauthorized
modification:
•
Engine limited to a lowest power output state.
•
Transmission locks out access to first gear and shifts
earlier than normal.
•
Traction, Steering and Suspension are forced to
STREET settings.
•
Steering wheel mounted paddle shifters are disabled.
•
The SRT Drive Modes are not available. Pushing the
SRT button will display the unlock keypad.
•
The ESC Off button is disabled.
•
The Launch Control button is disabled.
NOTE:
•
To exit VALET Mode the operator must enter the same
four digit PIN that was used to enter the mode. The
unlock keypad can be accessed by either pushing the
SRT button or selecting to disable Valet on the
Uconnect touchscreen.
•
The vehicle will restart with VALET active if VALET
was active when the vehicle was last shut down.
•
Eco (Automatic Transmission only) — Eco modifies
the vehicle’s engine and transmission settings to pro-
vide improved fuel economy at a trade-off with accel-
eration performance. Increased engine exhaust noise
and/or vibration may be noticed while Eco is active,
this is normal and will not damage the vehicle.
NOTE: Changing the Drive Mode will deactivate Eco.
404 STARTING AND OPERATING