Dodge 2015 Charger POLICE Owner'S Manual Supplement Download Page 66

Page: 66 / 79

MAINTENANCE PROCEDURES

Police and fleet vehicles are equipped with heavy-duty

parts that are designed specifically for the varying de-

mands and unique requirements under which they are

operated. This booklet illustrates and describes the op-

eration of unique features and equipment that are either

standard or optional on this vehicle. A description of

features and equipment no longer available, or not

ordered on this vehicle, may also be included. Please

disregard any features and equipment described in this

manual that is not on this vehicle.
Failure to maintain your vehicle properly may reduce

vehicle performance and operational capabilities, ad-

versely affect the safety of you and your passengers, as

well as restrict your warranty coverage. Refer to the

“Maintenance Schedule” in the Owner’s Manual for the

proper maintenance intervals.

The manufacturer reserves the right to make changes in

design and specifications, and/or make additions to or

improvements to its products, without imposing any

obligation upon itself to install them on products previ-

ously manufactured.

Brake System Maintenance

CAUTION!

•

Perform this procedure in a controlled environ-
ment, as high speeds and moderate rates of decel-
eration are necessary in order to complete this
procedure. Failure to follow this warning can result
in an collision with serious or fatal injuries.

(Continued)

64 MAINTAINING YOUR VEHICLE

Summary of Contents for 2015 Charger POLICE
















































































Search results

Summary of Contents for 2015 Charger POLICE

Reviews:

Related manuals for 2015 Charger POLICE

Brands by name

Popular brands

Dodge 2015 Charger POLICE, Owner'S Manual Supplement

Search results

Summary of Contents for 2015 Charger POLICE

Reviews:

Related manuals for 2015 Charger POLICE

Brands by name

Popular brands