Dodge 2015 Charger POLICE Owner'S Manual Supplement Download Page 50

Page: 50 / 79

WHEEL AND TIRE TORQUE SPECIFICATIONS

Proper lug nut/bolt torque is very important to ensure

that the wheel is properly mounted to the vehicle. Any

time a wheel has been removed and reinstalled on the

vehicle the lug nuts/bolts should be torqued using a

properly calibrated torque wrench.

Torque Specifications

Lug Nut/Bolt Torque

**Lug Nut/

Bolt Size

Lug Nut/

Bolt Socket

Size

130 Ft-Lbs (176 N·m)

M14 x 1.50

22 mm

**Use only Chrysler recommended lug nuts/bolts and

clean or remove any dirt or oil before tightening.
Inspect the wheel mounting surface prior to mounting

the tire and remove any corrosion or loose particles.

Tighten the lug nuts/bolts in a star pattern until each

nut/bolt has been tightened twice.
After 25 miles (40 km) check the lug nut/bolt torque to be

sure that all the lug nuts/bolts are properly seated

against the wheel.

Wheel Mounting Surface

48 WHAT TO DO IN EMERGENCIES

Summary of Contents for 2015 Charger POLICE
















































































Search results

Summary of Contents for 2015 Charger POLICE

Reviews:

Related manuals for 2015 Charger POLICE

Brands by name

Popular brands

Dodge 2015 Charger POLICE, Owner'S Manual Supplement

Search results

Summary of Contents for 2015 Charger POLICE

Reviews:

Related manuals for 2015 Charger POLICE

Brands by name

Popular brands