manualshive.com logo in svg

Dodge 2014 dodge charger, Owner'S Manual

The 2014 Dodge Charger Owner's Manual is an essential guide for every Dodge Charger owner, providing detailed information and instructions for the vehicle's features, maintenance, and troubleshooting. Download this manual for free from manualshive.com and empower yourself with all the necessary knowledge to enhance your driving experience.

Share
Download
background image

WARNING!

Leaving the Electronic Speed Control system on
when not in use is dangerous. You could accidentally
set the system or cause it to go faster than you want.
You could lose control and have an accident. Always
leave the system OFF when you are not using it.

To Set A Desired Speed

Turn the Electronic Speed Control ON. When the vehicle
has reached the desired speed, press the SET (-) button
and release. Release the accelerator and the vehicle will
operate at the selected speed.

NOTE:

The vehicle should be traveling at a steady speed

and on level ground before pressing the SET button.

To Deactivate

A soft tap on the brake pedal, pushing the CANCEL
button, or normal brake pressure while slowing the
vehicle will deactivate the Electronic Speed Control with-
out erasing the set speed memory.

Pressing the ON/OFF button or turning the ignition
switch OFF erases the set speed memory.

To Resume Speed

To resume a previously set speed, push the RES (+)
button and release. Resume can be used at any speed
above 20 mph (32 km/h).

To Vary The Speed Setting

To Increase Speed

When the Electronic Speed Control is set, you can in-
crease speed by pushing the RES (+) button.

244

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2014 dodge charger


































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2014 dodge charger

ZAPTEC Go Instruction Manual preview
Go
Brand: ZAPTEC Pages: 240
Horn Tools HISDMSPTRA01 Mounting Instructions preview
HISDMSPTRA01
Brand: Horn Tools Pages: 6
CITROEN C8 NaviDrive Manual preview
C8 NaviDrive
Brand: CITROEN Pages: 52
REVCAMUK MON16AHD Instructions preview
MON16AHD
Brand: REVCAMUK Pages: 4
iDataLink BLADE-AL(TB)-TL2 Install Manual preview
BLADE-AL(TB)-TL2
Brand: iDataLink Pages: 9
Magneti Marelli BCF184 Installation Instructions preview
BCF184
Brand: Magneti Marelli Pages: 2
Safe Fleet RVS-082550 Instruction Manual preview
RVS-082550
Brand: Safe Fleet Pages: 11
Camec 042374 User Manual preview
042374
Brand: Camec Pages: 19
K&M MILSCO KIT# C746700 Installation Manual preview
MILSCO KIT# C746700
Brand: K&M Pages: 2
Car-Interface CI-RL4-NAC12 Manual preview
CI-RL4-NAC12
Brand: Car-Interface Pages: 25
Thule 2 Bike Carrier 977 Instructions Manual preview
2 Bike Carrier 977
Brand: Thule Pages: 6
Veigel S47290920 Installation And Operating Instructions Manual preview
S47290920
Brand: Veigel Pages: 24
Cellular Line interphone Instruction Manual preview
interphone
Brand: Cellular Line Pages: 25
Alpitronic Hypercharger HYC 075 Operation Instructions And Installation Manual preview
Hypercharger HYC 075
Brand: Alpitronic Pages: 64
Sanitas SMG 245 Instructions For Use Manual preview
SMG 245
Brand: Sanitas Pages: 36
Fab Fours C3150 Installation Instructions Manual preview
C3150
Brand: Fab Fours Pages: 21
Quadratec QuadraTop 11051.0415 Installation Manual preview
QuadraTop 11051.0415
Brand: Quadratec Pages: 8
Packard 1948 eight Operating Instructions Manual preview
1948 eight
Brand: Packard Pages: 25

Brands by name

Popular brands

Load more brands