Dodge 2006 DH Ram, Owner'S Manual

Page: 381 / 493

•
Driving in dusty conditions.
•
Frequent trailer towing.
•
Taxi, police, or delivery service (commercial service).
•
Off-road or desert operation.
•
Extensive operation at high engine speeds (greater
than 2900 rpm) and loads (greater than 70% throttle).
If
ANY
of these apply to you, then change your engine oil
at every interval shown in schedule
⬙
B
⬙
of the
⬙
Mainte-
nance Schedules
⬙
section of this manual.
If none of these apply to you, then change your engine oil
at every interval shown on schedule
⬙
A
⬙
of the
⬙
Mainte-
nance Schedules
⬙
section of this manual.
NOTE: Most vehicles are operated under the conditions
listed for Schedule
⬙
B.
⬙
Engine Oil Selection
1. Engine Oil Quality
Use only oils conforming to API Ser-
vice CI-4. A sulfated ash limit is speci-
fied for lubrication oil used in Cum-
mins engines. Oils with a high ash
content may produce deposits on
valves that can progress to guttering
and valve burning. A maximum sul-
fated ash content of 1.85 mass % is recommended for all
oil used in the engine.
2. Engine Oil Viscosity (SAE Grade)
The proper SAE viscosity of engine oil for the expected
ambient temperature range should be selected, as indi-
cated in the following chart:
MAINTAINING YOUR VEHICLE 381
7