Dodge 2004 Freightliner Owner'S Manual Download Page 75

Page: 75 / 272

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 75

Mechanical Sun Roof Operation

The sun roof does not open or close:

Check electrical fuse. Electrical fuses refer to “Electrical
Fuses“.

If the fuse works correctly, the sun roof can also be
closed or opened manually.

Remove cover (1) at the front frame of the sun roof.

Remove tool (2) from the cover (1) and insert.

Open manually:
Press in tool (2) and turn counterclockwise (3).

Close manually:
Press in tool (2) and turn clockwise (4).

Have malfunctions rectified by an authorized Sprinter
Dealer.

Freightliner-all.book Page 75 Monday, December 1, 2003 2:54 PM

Summary of Contents for 2004 Freightliner

















































































































































































































































































Search results

Summary of Contents for 2004 Freightliner

Reviews:

Related manuals for 2004 Freightliner

Brands by name

Popular brands

Dodge 2004 Freightliner, Owner'S Manual

Search results

Summary of Contents for 2004 Freightliner

Reviews:

Related manuals for 2004 Freightliner

Brands by name

Popular brands