Dodge 2004 Freightliner Owner'S Manual Download Page 218

Page: 218 / 272

218 MAINTAINING YOUR VEHICLE

REPLACING WIPER BLADES

1. Fold over the wiper arm (2) and place the wiper

blade crosswise.

2. Press the retaining spring (1) and push the wiper

blade out of the end of the wiper arm (2).

3. Remove the wiper blade.

4. Insert the end of the wiper arm (2) into the larger

cutout (3) of the wiper blade.

5. Push the wiper blade into the end of the wiper

arm (2) until the retaining spring (1) engages.

Freightliner-all.book Page 218 Monday, December 1, 2003 2:54 PM

Summary of Contents for 2004 Freightliner

















































































































































































































































































Search results

Summary of Contents for 2004 Freightliner

Reviews:

Related manuals for 2004 Freightliner

Brands by name

Popular brands

Dodge 2004 Freightliner, Owner'S Manual

Search results

Summary of Contents for 2004 Freightliner

Reviews:

Related manuals for 2004 Freightliner

Brands by name

Popular brands