Appendix/Index
176
The exposure standard for wireless tablet device employs a
unit of measurement known as the Specific Absorption Rate
(SAR). The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR
are conducted using standard operating positions as accepted
by the FCC with the device transmitting at its highest certified
power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR
level of the device while operating can be well below the
maximum value. This is because the device is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to
a wireless base station antenna, the lower the power output
level of the device.
Before a tablet model is available for sale to the public, it must
be tested and certified to prove to the FCC that it does not
exceed the limit established by the U.S. government-adopted
requirement for safe exposure. The tests are performed on
position and locations (for example, worn on the body) as
required by FCC for each model. The highest SAR value for this
tablet device as reported to the FCC, when worn on the body,
is 1.55 W/kg
*
. (Body-worn measurements differ among tablet
models, depending upon available accessories and FCC
requirements).
While there may be differences between the SAR levels at
various positions, they all meet the U.S. government
requirements. The FCC has granted an Equipment
Authorization for this tablet device with all reported SAR levels
evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this tablet device is on file with
the FCC and can be found under the Equipment Authorization
Search section at http://www.fcc.gov/oet/ea/fccid/ (please
search on FCC ID VQK-F04H).
For body worn operation, this device has been tested and
meets the FCC RF exposure guidelines.
Please use an accessory designated for this product or an
accessory which contains no metal and which positions the
device a minimum of 1.5 cm from the body.
･
In the United States, the SAR limit for wireless tablet device
used by the general public is 1.6 Watts/kg (W/kg), averaged
over one gram of tissue. SAR values may vary depending
upon national reporting requirements and the network
band.
*
Including other radio systems that can be simultaneously
used with cellular radio wave.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
