External device connection
156
3
Connect the HDMI conversion cable to the
external connection jack of the terminal
・
Connect it with the terminal turned ON.
・
When the HDMI cable is removed while displaying TV,
the terminal enters a standby state in a certain period of
time.
✔
INFORMATION
・
When connecting a device that does not support HDCP,
images or sounds are not output properly.
・
When the MHL output starts, the input may not be changed
and images may not appear depending on the connected TV.
In such case, switch the input by a TV remote control etc.
・
The data output by the terminal cannot be adjusted inside the
screen depending on the connected TV. In such case, change
the TV display setting.
・
While connecting the HDMI cable, do not grab the HDMI cable
to lift up the terminal.
・
When the TV is not used, remove the HDMI cable.
・
While connecting the MHL, the radio wave environment may
be affected depending on the usage environment.
◆
Displaying on Wi-Fi Miracast device via
Wi-Fi connection
Show videos, images, etc on TV screen or displays by
connecting the terminal to a Wi-Fi Miracast device through Wi-
Fi connection.
1
From the Home screen,
→
[Settings]
2
[Wi-Fi]
→
[Screen/Music Cast]
→
Place a check
mark in [Enable wireless display]
3
Tap a detected Wi-Fi Miracast device
Disconnecting Wi-Fi Miracast device :
Tap a connected
device
→
[DISCONNECT]
✔
INFORMATION
・
When connecting a device that does not support HDCP,
images or sounds are not output properly. Depending on
content, external output may be prohibited from the content
provider or may be suppressed due to a performance
problem.
・
With some applications, content appears on the connected
device, and operations such as playback can be performed
from the terminal.