6
3.1 FUNCTIONING AND USAGE OF THE MACHINE
The machine has been designed and manufactured solely for the purpose of cutting wood and materials derived from or comparable to wood, in
agricultural companies or for hobbyists. The machine has been designed for usage outdoors.
The machine can be utilized to cut logs with a maximum diameter of 215mm and maximum length of 750mm. Should you need to work on
materials exceeding these measures (in any case only in length, never in diameter) it is necessary to have two people working together with the
machine, both fully trained on how it works and fit to use it safely.
Please refer to the following chapters, which shall be read carefully to guarantee a safe usage of the machine.
DANGER
BEFORE OPERATING THE MACHINE, READ THIS MANUAL CAREFULLY.
The machine must be used by trained and authorized personnel only. Safe usage of the machine is guaranteed only when following
the functions listed in the present manual scrupulously.
DANGER
Never install, on the machine, parts that are not supplied by DOCMA and/or exceeding the dimensions allowed (note 4.3 TECHNICAL
SPECIFICATIONS).
Before using any utensil, verify it is fully compliant with the requirements in regulation EN847-1:1997.
3.2 UNUSUAL OR UNEXPECTED USAGE OF THE MACHINE
DANGER
Any use or operation not in line with what is prescribed in this manual can cause damage to the machine and compromise the
operating technical conditions for which the machine has been designed and manufactured, which would possibly hamper its safety
characteristics.
In particular, it is absolutely forbidden to use the machine indoors or in an environment that is not well ventilated.
DANGER
The operator in charge must not carry out any type of maintenance and/or any action to help the machine, when this is completing its
working cycle.
4 SPECIFIC OPERATING INSTRUCTIONS
4.1 TRANSPORT, MOVEMENT, POINTS FOR LIFTING
DANGER
Please load, unload and move the machine with extreme care, making sure that, during the maneuvers, there are no people or things
within the range of the lifting device.
The machine is dispatched and delivered already fully assembled, and thanks to its supporting structure and light weight, it can be easily
transported by two people by hand, holding it by the chassis.
