DoAll C-260 NC, Instruction & Parts Manual

Page: 23 / 59

Instruction & Parts Manual
Pag.23
Edition A
In this manual will not be trained the operator to use the menu, because this area must be op-
erated only by the manufacturer or its representatives. The customer cannot modify any of the ma-
chine parameters, because this might cause severe injuries to the operator and people around the
machine.
12.1.3 Machine status icons
On the left upper corner of the display, it appears the machine status icon, which specify in which
mode or in which status the machine currently is. These icons are:
Icon Description Icon Description
Manual
Normal machine status, and allows to
operatorate machine manually.
organi
Program directory
The control is in the program directory
area
Semiautomatic
The saw is making a singul cut.
Sero setting
The machine is setting the index zero
Automatic
The machine is running an autoimatic
cutting program
Index positioning
Index is moving to a position.
Editing
One program is edited at the time
12.1.4 Singul components status icons
The following icons show the status oif each machine component durin
I
CONS
D
ESCRIPTION
Band motor ON / OFF
Index mouvement
Inboard vise open / close / undifined / opening / closing
Index vise open / close / undifined / opening / closing
Hydraulic’s ON / OFF
Head up / down fast / down slow / undifined
Coolant ON / OFF / ON in cycle
Band broken / Band OK
0m/m Blade speed control
12.1.5 Manual cycle
The SAW3 NC control has 28 customizable pushbuttons (or function keys) to control the entire ma-
chine. The standard version looks like the following: