DoAll C-260 NC, Instruction & Parts Manual

Page: 26 / 59

Instruction & Parts Manual
Pag.26
Edition A
12.1.7 Automatic cycle
12.1.7.1 Programs directory
By pushing the (program directory) the operator has full access to all the operations on pro-
gramm editing. It appears a sceen like the one below, in which it is possible to:
= M
AKE A NEW PROGRAM
= D
ELETE THE HIGHLIGHTED PROGRAM
= D
ELETE ALL THE PROGRAMS
=
G
O TO THE TOP OF THE PROGRAM LIST
=
G
O TO THE BOTTOM OF THE PROGRAM LIST
12.1.7.2 Create a new cutting program
The allows to make a new program. To edit a new cutting program it is required to enter the
following programs:
Blade speed
Cutting lenght
To move on the editing screen, use the arrows on the top right corner of the SAW 3 control. All the
figures typed must be confirmed by pressing the ENTER button.
The control, when editing the program, gives a numeric name by default to the program. This num-
ber follows the last one written in the control memory. By moving with the pointer on the name
field, the operator can modify the program name as he prefers.
The automatic screen gives also other important informations to the operator, like:
#
N
ECESSARY BAR LENGTH
to run the program. The SAW3 adds the cutting lenghts, times the
number of cuts, to the blade kerves. I.e.: (30 mm x 50 Pc) + (1,6 mm x 50 pc) = 1580.0
#
T
OTAL NUMBER OF CUTS TO DO
(50 in the example);
#
A
LREADY DONE CUTS
(0 in the example).
Nome
ALFA
BETA
GAMMA
001 70m/m
1 30.0 50
2
Len: 1580.0 50 0
Number of cuts