Configuring Image Archiving
WPS Pro EU User Guide
70
Archiving Images
1.
Make sure your
Archive
setting is set to ON. "Configuring Image Archiving" on page 87 for
more information.
2.
Insert a micro SD card in the slot on the back of the WPS Pro EU device.
3.
Once you print your image, your image is saved to the directory on your micro SD card.
Note
Your card must have a directory called
DNParchive
for your images to be saved.
If you do not have a micro SD card inserted into the slot, your images will not be saved.
Changing the Test Print Setting
When the WPS Pro EU starts, a test image is automatically printed. Use this procedure to enable or
disable that setting.
1.
Under the
General
section of the
WPS Pro Configuration
screen, locate the
Init Test Print
option.
2.
Using the radio buttons, set test images to either
OFF
or
ON
.
3.
Scroll to the bottom of the page and touch the
Save Configuration
button.
4.
Upon touching the
Save Configuration
button, your device restarts.
5.
After three minutes, reconnect to the WPS Pro EU Wi-Fi network. (If you have initial test prints
turned ON, reconnect once your test image prints.)
6.
Return to the
WPS Pro EU Configuration
screen to confirm the change has been made.
Summary of Contents for WPS Pro EU
