background image

49

Cleaning

  Chap

ter
 5

  Main

te

nanc

e

4

Check the remaining amount of print paper.

5

Open the ribbon door, and remove the ribbon tray.

6

Remove the ink ribbon, and replace it with the 
cleaning ribbon.

7

Load the ribbon tray into the unit, and close the ribbon 
door.

8

Touch the [OK] button in the message.

About 20 cm of paper is ejected automatically, and the 
message to start cleaning appears.

9

Remove the paper from the back side of the cleaning 
sheet (the side without illustrations).

Be careful not to remove the paper from the wrong side 
of the sheet.

10

Refer to the following illustrations according to the 
width of your paper roll, determine the orientation of 
the cleaning sheet, and affix the sheet evenly onto the 
paper 5 cm away from the edge.

When using the 2UPC-R203/R205 series 
printing pack

Affix the cleaning sheet vertically.

When using the 2UPC-R204/R206/C26 series 
printing pack

Affix the cleaning sheet horizontally.

11

Remove the paper from the front side of the cleaning 
sheet.

Make sure that the four corners of the cleaning sheet 
are firmly affixed and not curling up.

12

Touch the [OK] button in the message.

Cleaning for the thermal head and roller starts, and 
dust and particles are removed from the interior. When 
cleaning is finished, the print paper is cut and the 
cleaning sheet is ejected.

About 5 cm

About 5 cm

Summary of Contents for DS-SL20


















































































Reviews: