
14
Installation
Chap
te
r 2
Pr
epa
ra
tio
n
s
(C)
USB port (host) × 2
Allows connection of a USB device.
You can connect a commercially available card reader
or USB memory device to this port and use it to read
data.
1)
You can also connect an expansion printer.
1)Correct operation with every card reader and USB memory device is
not guaranteed.
Operation is not guaranteed when connected by a USB hub.
PictBridge is not supported.
(D)
Expansion CompactFlash card slot
When using features such as border print or
promotional images, insert the expansion
CompactFlash card here.
(4)
POWER switch
Turns the unit’s power on or off.
(5)
~ AC IN (power source) connector
Connect the power cord here.
(6)
Security slot
Allows you to attach a wire lock to prevent theft.
Installation
Connecting the Power Cord
Connect the power cord to the ~ AC IN connector on the
back of the unit, and then connect the plug to a power
outlet.
To secure the power cord
Wrap the cable clamp around the power cord, and fasten it
securely as shown.
Adjusting the Display Angle
The display angle can be adjusted to make the display
more easily viewable. Four settings are available for angle
adjustment.
DS-SL20
to
AC IN
connector
AC power cord
(not supplied)