Monitoring Printer Status
(Cont’d)
Displaying Media Status
Media Status: Displays the media’s remaining space available.
Card Quantity: Displays the remaining card quantity as three different levels as shown below. The
display may vary according to the thickness as well as bend of the card.
Card Quantity Display
Card Thickness of 0.76 mm
Card Thickness of 0.25 mm
Enough
Approx. 25 cards or more
Approx. 70 cards or more
Less
Less than 25 cards
Less than 70 cards
None
No card
No card
Ink Quantity:
Displays the remaining ink ribbon quantity in 50 different levels in percentage.
Film Quantity: Displays the remaining retransfer film quantity in 10 different levels in percentage.
Caution
The remaining quantity shown is an estimated value. Differences may occur according to
the usage as well as media type.
Ink:
Displays the information on the mounted ink ribbon. The print counter appears blank if the
ink ribbon is not correctly recognized. You may not be able to control the ink ribbon
properly in this case. Refer to the “Setting the ink ribbon” of the “CX-330 Instruction
Manual” (separate booklet) on how to check its installation.
Film:
Displays the type of retransfer film mounted.
Print Counter: Displays the number of cards that have been issued. Press the “Clear” button to reset the
print counter to 0.
Selecting a Printer
Printer Selection: You can switch to the relevant printer when multiple printers are connected to a single
host computer.
Pressing the “Update” button searches for a connected printer and updates the printer in the list box.
When a printer is selected from the list box, the status of the selected printer is automatically displayed.
Document Info: Displays the owner and document names when printing is enabled through a network
connection.
9