DMX UNIVERSE DR1.1 RDM
10
DMX-Output
For using the
DMX UNIVERSE DR1.1 RDM
as DMX-Output (Ethernet to DMX)
please select the Interface Mode
DMX-Output
in the Main-Settings.
By clicking
DMX-Output
you reach the following configuration site:
The Art-Net™ parameter
SubNet, Net
and
Port
must be set in accordance to the Art-
Net™ specifications and show the aim for the DMX data.
The
Merge
settings can be adjusted at LTP (Latest) for last change or HTP (Highest)
for highest value.
Framerate
set the maximum DMX frame rate in the output.
MAX is the maximum frame rate of ca. 44 fps (frames / second).
Fail Action
sets the behavior in case of failure of the Art-Net™ data.
Via
Enable Sync
the DMX output of several devices can be synchronized.
The option
Save current DMX values as defaults
stores current DMX values and
restores these in case of Fail Action.
The option
Enable DMX output after first data packet
starts the DMX-Output not
until the first Art-Net™ data package is received after turn on.