DMX UNIVERSE DR1.1 RDM
11
DMX-Input
For using the
DMX UNIVERSE DR1.1 RDM
as DMX-Input-Interface (DMX to Art-
Net™), please select the interface mode
DMX-Input
in the main settings.
By clicking
DMX-Input
you reach the following configuration site:
The Art-Net™ parameter
SubNet, Net
and
Port
must be set in accordance of Art-
Net™ specifications and show the aim for the DMX data.
Use Broadcast
: The DMX data will be send to all devices within the Art-Net™
Use Unicast
:
The DMX data will be send to a specified device with the
Unicast IP
within the Art-Net™
Several actions are available for the DMX input in the case of a breakdown of the
DMX signal (
DMX Input Fail
).
NO DATA
- via Art-Net™ will be no DMX input received
HOLD last DMX data
- the last data will be retained
CLEAR all DMX channels to 0% - all DMX channels will be set to 0
SET all DMX channels to 100%
- all DMX channels will be set to 255
The
Update-Rate
with which the DMX input data are outputted can be switched in
several times.
On change data
transferred only the DMX input data if these changes, however
max. every 0.1 seconds.
DMX Framerate
transferred the received DMX values as soon as a frame has
finished. So, the frame rate of the incoming DMX signal will be used for the update
rate.