ArtNet Player X16+
19
Remote settings
A DMX-, ArtNet-, sACN-Signal or the DMX4ALL Commands can be used for the
ArtNet Player X remote control.
Under the menu
Remote options,
the signal source can be set:
The remote function is activated by selecting the source (
Source
).
It can be selected for Source Disable / DMX / ArtNet / sACN.
Disable
No remote function activated.
DMX
With DMX-Remote the DMX data from the DMX input is used.
In this case, RDM is activated at the DMX input, which enables the ArtNet Player X to
be recognized and addressed as an RDM device.
ArtNet
In case of ArtNet remote additional the parameter Port, SubNet and Net must be
defined via which the DMX data are received.
sACN
In case of sACN remote the universe must be specified via which the DMX data are
received.
Channel
sets the DMX start address from which the remote channels are used.
