ArtNet-DMX Mux24
20
Timer
The
ArtNet-DMX Mux24
offers 4 timer. Each of these have a time for switch-on and
a time for switch-off as well as a selection for the weekdays on which the timer
should be active.
The channel on which the timer should work will be specified as decimal value from 1
up to 512. If several channels should be controlled via the timer, so the single values
must be entered separately with a comma.
For example a single channel with „100“ or several channels with „100,110,120“.
Furthermore, it is possible to specify to be outputted. In this case the channel
specifications need an =
VALUE
, e.g. “100=222” to set channel 100 to 222.
If no value is specified, 255 (100%) is outputted, the specified value must be in the
range 0 to 255.
With
Save
the settings will be stored and the current time will be adopted in the
ArtNet-DMX Mux24, from the device on which the website was called.
