ArtNet-DMX Mux24
14
Use digital inputs as binary inputs
For the digital inputs there are the possibilities to build one output value away several
inputs.
In this case the input must be configured as
Switch
.
The specification for the channels needs than an +=
VALUE
.
So, for the specified channels the value will be added.
A possible configuration for an 8Bit-binary input is as follows:
Inputs:
IN1 up to IN8
Outputs:
DMX channel 1
Configuration: INPUT1: Mode:
Switch
Parameter: 1+=1
INPUT2: Mode:
Switch
Parameter: 1+=2
INPUT3: Mode:
Switch
Parameter: 1+=4
INPUT4: Mode:
Switch
Parameter: 1+=8
INPUT5: Mode:
Switch
Parameter: 1+=16
INPUT6: Mode:
Switch
Parameter: 1+=32
INPUT7: Mode:
Switch
Parameter: 1+=64
INPUT8: Mode:
Switch
Parameter: 1+=128
