![background image](http://html1.mh-extra.com/html/dmx4all/90-3373/90-3373_user-manual_2514386003.webp)
DMX-LED-Dimmer XS3
3
Description
The
DMX-LED-Dimmer XS3
is designed to control RGB or single-colour LED-Stripes
with 12V or 24V.
3 Outputs
The DMX-LED-Dimmer XS3 has three outputs to connect LEDs. All outputs are
designed at the same, so single-colour or RGB LEDs can be connected.
High Power Outputs
The outputs can drive a current up to 2A.
So it is possible to connect a maximum load of 72W (12V) / 144W (24V).
0% up to 100% dimmable
The connected LEDs are dimmed via PWM from 0% up to 100%.
For voltages from 12V up to 24V
The DMX-LED-Dimmer XS3 runs with a power supply from 12V up to 24V.
DMX-FAIL Function
An adjustable DMX-FAIL Function offers the option to get, in case of lost DMX signal,
the current state (HOLD) or assuming a preset value.
DMX-Master dimmer
Optionally, another DMX channel can be activated as master dimmer (all outputs).
RDM support
The DMX-LED-Dimmer XS3 allows configuration by RDM via DMX.
All parameters can be set with the RDM Configurator.
Stand-Alone-Function
The DMX-LED-Dimmer XS3 has a user-programmable Stand-Alone-Function, to
replay an internal program.
LED-Status-Display
The DMX receiving is indicated via the LED status display.