Instructions for installation, setup and operation - FP9000E
Page
2
of
20
P.
CONTENTS:
2
INTRODUCTION
3
TECHNICAL PARAMETERS
6
CONTROLS AND INDICATION
8
DEFAULT PARAMETERS
8
INSTALLATION AND PANEL SETUP
14
ACCESS LEVELS
15
OPERATION MODES
18
INFORMATION AND CONTROL CONDITION
19
DELIVEERY COMPOSITION AND COMPLEXITY/SET AND WARRANTY
1. INTRODUCTION
FP9000E is a conventional fire extinguishing control panel. The panel is designed for using together with
systems for gas, powder, aerosol, water and other types of active extinguishing.
FP9000E has 3 zones - 2 extinguishing with activation of automatic fire detectors and 1 conventional fire
zone. Automatic and manual operation modes (selectable via 3 positional key lock) allow the operators to
choose the extinguishing process control.
The FP9000E conventional panel is designed for extinguishing in one zone and can operate with
solenoids, pressostats and other kind of actuators.
Each fire line can be connected to 32 detectors. Through the display and keyboard can be programmed and
adjusted over 50 functional parameters. Each line has 5 individual programmable parameters and that
makes the panel universal for any type of conventional Fire detectors. All the panel conditions information
is displayed on LCD 2x16 display and LED indicators. Volatile memory and real time clock enable
recording and review of 1600 archive events.
Quick and easy - installation, setup and starting. Simple and clear procedures for operation
and maintenance of the system.
