Instructions for installation, setup and operation - FP9000E
Page
15
of
20
This is a level of access to persons, who are responsible for the safety and are trained and authorized to
operate the panel in the conditions:
Security;
Activated;
Fire;
Fault;
Disabled component;
Test.
In access level 2 are available are following features:
Exit from Fire and Activated condition;
suppression of the outputs, activated when Fire and Activated;
involuntary activation of the controllable outputs;
suppression of built- in sounder.
Switching from
Level 2 to Level 1 and vice versa
happens after a combination of buttons and the
relevant information on the display.
The selection happens from the second menu of the main menu - " Access Level ".
After entering the menu, with button «Enter» and the corresponding buttons up and down choose
the level. Confirm again with «Enter».
The selected level, in Security/Duty mode, is displayed in the upper right corner of the display.
Access level 3
In Level 3 is reached by entering a password and opening the front cover of the panel.
Available are the following panel’s features:
all possibilities from Levels 1 and 2;
Replacing a burnt fuse;
Configure from menu settings of all parameters.
Access Level 4
This is the level of access for persons who are trained and authorized by the manufacturer to
repair the panel and modify the software.
Special means are required to enter this level.
8. OPERATION MODES
8.1. Normal Operation Mode
