DMT Controller Pixelstrip MKII, Manual

Page: 15 / 28

Ordercode: 42273
Controller Pixelstrip MKII
1. Auto Mode
With this menu, you can set the built-in programs.
01) Press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the following 2 options:
Program speed
Program choice
04) When the display shows , press the ENTER button to open the menu.
05) Press the UP/DOWN buttons to increase/decrease the program speed. The adjustment range is
between , from slow to fast.
06) Press the ENTER button to save changes.
07) When the display shows , press the ENTER button to open the menu.
08) Press the UP/DOWN buttons to toggle between the available programs:
. You can choose between 29
programs and Mix (all the built-in programs will be displayed in a sequence).
09) Press the ENTER button to save changes.
2. DMX Address
With this menu, you can set the desired DMX address.
01) Press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose the desired DMX address. The adjustment range is between
.
04) Press the ENTER button to save changes.
3. Software Information
With this menu, you can check the currently installed software version.
01) Press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) The display shows the current software version: .
14