23
User Code Length
Define the number of User Code bits. Press any select area
to enter a custom number. Custom numbers can only be a
number between 16-32. Press CMD to save the entry. The
default is the DMP value of 16.
Require Site Code
Press YES to use a site code, for non–DMP cards, and press
CMD to view the site code entry display. Default is NO.
In addition to User Code verification, door access is only
granted when any one site code programmed at the SITE
CODES entry option matches the site code received in the
Wiegand string. You can program up to 8 three-digit site
codes.
Note:
A card with a site code greater than three digits
cannot be used. Use only cards with three-digit site codes.
Site Codes 1-4
Enter site codes 1-4 (left to right separated by > sign). Press
the > sign to add, delete, or change the site code. Press
CMD to save the entry. Site code range is 0-999.
Site Codes 5-8
Enter site codes 5-8 (left to right separated by > sign). Press
the > sign to add, delete, or change the site code. Press
CMD to save the entry. Site code range is 0-999.
SITE CODES 1-4
> > > >
SITE CODES 5-8
> > > >
USER CODE:
LENGTH 16
REQUIRE SITE
CODE: NO YES
Installer Options
Summary of Contents for 7872
Page 39: ......
Page 40: ...LT 1162 1 03 17274 ...
