Annex 4 – VVVF Frenic Lift Setting
(Figure 14)
Device
Time needed for updating SW
Mother board (Playboard Controller)
3 minutes
PlayPad 4.0
1 minute
TOC Board (Car TOP Interface)
1 minute
DMCPIT Board (Car COP Interface)
1 minute
Serial Pushbittons Intarfaces (BDU Devices)
30 seconds
Expansion boards (PIT8 / 16RL / 16IO)
30 seconds
(Table III.1 – Timing for SW update)
In the case of a Controller equipped with electric inverter Fuji FRENIC Lift, the self-learning procedure of motor data
(“Tuning”) must be performed. This must be carried out in order to align the functioning of the drive to the electrical
characteristics of the motor on site. The tuning procedure must be done in temporary operation. The procedure is
different according to the type of Motor.
– Tuning procedure –
Select “Installation menu”
In the screen will appear:
Confirm by pressing OK and select “Machine / VVVF Autotuning:
Motor Tuning (VVVF Controller)
