HX33-DS Rev. A
Page 17 / 23
10
Problem Handling and Fault Diagnostics
DANGER
+
Due to the risk of hand or finger injury, never try to reach into the machine before having
assured that the machine is disconnected from the air supply. Disconnect the air supply
before changing the safety guard and the dies.
CAUTION
+
Before starting maintenance, disassembly or repair work, the crimping machine must be
disconnected from air supply.
+
Maintenance work may be performed only by authorized and properly trained staff. The
housing and the covers in particular may only be removed by specially trained staff.
+
When working with the HX33 pneumatic crimp machine, do not wear loose clothing,
jewellery or long, loose hair that can get caught in the HX33 pneumatic crimp machine.
+
Work with caution.
+
Before commissioning the machine, it is always important to check whether all safety
devices, especially the safety guard and the die set, are installed and are functioning
correctly.
In the event of a problem, our customer service personnel will be able to help you.
Service address:
DMC
Daniels Manufacturing Corporation
526 Thorpe Road
Orlando, FL 32824-8133
USA
Telephone: 001 407 855 6161
www.dmctools.com
Please have the following information ready when you contact service:
+
Machine Type/Part Number
+
Machine Serial Number
