HX33-DS Rev. A
Page 11 / 23
4.5
Release Button
In case of jammed jaws caused by operation
or handling errors or wrongly placed
terminals the jaws can be opened as follows:
+
Press release button.
5
Transport and Installation
5.1
Transport
The weight of the pneumatic crimp machine HX33 is approx. 32 lbs / 14 kg.
CAUTION
+
During transport and installation of the machine, wear suitable safety shoes.
ATTENTION
+
Pneumatic tubes must not be damaged.
5.2
Installation
ATTENTION
+
Position the HX33 pneumatic crimp machine on a flat surface and assure the stability of the
machine. Ensure that the table or bench is stable enough to support the machine in normal
use.
+
Assure an appropriate table height. The table height is dependent on the position of the
operator, (work in sitting or standing position) according to prEN 894-4:2004, Table A.1.
+
Assure appropriate illumination of the working place. (EN 1837:1999
– chapter 4.2: “The
general value of illumination has to be 500 lx [...]").
INFORMATION
+
To reduce production noise or vibration, the machine can be placed on an insulating rubber
mat.
Place the foot pedal on the floor. No other place is allowed!
Fig. 4.4
Fig. 4.5
