Jewel Jackpot - Setup and Service Menu Manual 1.3.doc
39
Coin Configuration
Channel 0…5
Coin channel number. When checked, Coin Acceptor will be
enabled to accept coins on this channel.
•
Disabled
•
Enabled
NOTE: If coin value was configured as zero in initial setup,
Coin Acceptor would not acceptor coins on this channel.
Value 0…5
Value of coin on specified channel
8.5.8 Coin Hopper Setup
This menu allows operator to enable/disable Coin Hopper.
General
Enable Coin Hopper
If checked, coin hopper will be enabled to process payout
requests.
•
Disabled
•
Enabled
Type
Type of Coin Hopper that was configured during initial setup
Coin Value
Single coin value
8.5.9 Touch Screen Setup
This menu allows to setup touch screen device. Currently system supports ELO-compatible
serial and USB touchscreens. For serial touchscreens COM2 port on the backplane should be
used, for USB devices any USB port can be used on the backplane. When touchscreen is
enabled, system will automatically detect connected device and its model.
General
Enable Touchscreen
Enables touch screen device auto-detection.
Autodetect Touchscreen
Enable touchscreen device auto detection (if applicable)
Type
Manual touchscreen device type selection
•
ELO Serial Touchscreen
•
USB HID Touchscreen
•
GeneralTouch Serial Touchscreen
Manufacturer / Model
Connected device manufacturer and model
Connected
“Yes” if device is connected and detected properly
Configuration
Swap Axes
Swaps input of X and Y axes
Invert X Axis
Inverts X coordinates received from the device
Invert Y Axis
Inverts Y coordinates received from the device
NOTE: This option should be checked for most of the serial
touch screen devices before testing or calibration
Calibrate and Test…
This button will appear on the screen, when touch screen
device is detected. Follow on screen instructions to calibrate
and test touch screen.