8
REPLACING THE STRAP
1.
If the strap has become worn or is beginning to show signs of strands breaking, it
must be replaced before being used again. To do this, remove the defective
strap by free spooling. Remove the screw M4x6 (Part# NWB300015) on the
drum and take out the winch drum; disassemble the pin (Part#
NWB300014)release the strap.
2.
Replace the new strap and assemble the winch.
3.
Ensure that the strap is re-spooling in the under wind position.
4.
WARNING - Only replace the strap with the identical replacement part
recommended by the manufacturer.
Summary of Contents for EW8020
Page 1: ...EW8020 WINCH...
