DJI Mavic 3 Classic
User Manual
75
©
2022 DJI All Rights Reserved.
Flight Test
Takeoff/Landing Procedures
1. Place the aircraft in an open, flat area with the aircraft status indicator facing towards you.
2. Turn on the aircraft and the remote controller.
3. Launch DJI Fly and enter the camera view.
4. Wait until the self-check is finished, it is safe to fly if there is no abnormal warning in DJI Fly.
5. Gently push the throttle stick to take off or use auto-takeoff.
6. Pull the throttle stick or use auto-landing to land the aircraft.
7. After landing, push the throttle stick down and hold. The motors stop after one second.
8. Turn off the aircraft and remote controller.
Video Suggestions and Tips
1. The pre-flight checklist is designed to help you fly safely and to ensure that you can shoot
video during flight. Go through the full pre-flight checklist before each flight.
2. Select the desired gimbal operation mode in DJI Fly.
3. Use Normal or Cine mode to record video.
4. DO NOT fly in bad weather conditions such as when it is raining or windy.
5. Choose the camera settings that best suit your needs.
6. Perform flight tests to establish flight routes and to preview scenes.
• Make sure to place the aircraft on a flat and steady surface before takeoff. DO NOT
takeoff from your palm or while holding the aircraft with your hand.
