DJI Mavic 3 Classic
User Manual
50
©
2022 DJI All Rights Reserved.
Flight Pause/RTH Button
Press once to make the aircraft brake and hover in place. Press and hold the button until the
remote controller beeps to start RTH, the aircraft will return to the last recorded Home Point.
Press this button again to cancel RTH and to regain control of the aircraft.
Customizable Buttons
Go to System Settings in DJI Fly and select Control to set the functions of the customizable C1
and C2 buttons.
Status LED and Battery Level LEDs Description
Status LED
Blinking Pattern
Description
—
Solid red
Disconnected from the aircraft
Blinking red
The battery level of the aircraft is low
—
Solid green
Connected with the aircraft
Blinking blue
The remote controller is linking to an aircraft
—
Solid yellow
Firmware update failed
—
Solid blue
Firmware update successful
Blinking yellow
The battery level of the remote controller is low
Blinking cyan
Control sticks not centered
Battery Level LEDs
Blinking Pattern
Battery Level
75%~100%
50%~75%
25%~50%
0%~25%
Remote Controller Alert
The remote controller beeps when there is an error or warning. Pay attention when prompts
appear on the touch screen or in DJI Fly. Slide down from the top and select Mute to disable all
alerts, or slide the volume bar to 0 to disable some alerts.
