DJI Motion Controller
User Manual
10
© 2021 DJI All Rights Reserved.
Brake Button
Lock Button
Mode Button
Lock Button
Press twice to start the motors of the aircraft.
Press and hold to make the aircraft automatically take off, ascend to approximately 1 m, and hover.
Press and hold while hovering to make the aircraft automatically land and the motors to stop.
Press once to cancel Low Battery RTH when the countdown appears in the goggles.
Critical Low Battery RTH cannot be canceled.
Brake Button
Press once to make the aircraft brake and hover in place. The goggles will show
. Press again to unlock the
attitude and record the current position as zero attitude. To record the zero attitude, the motion controller must
be held upright and the white dot must be inside the box of the motion controller movement display. The box
turns to
when the white dot is inside.
If the aircraft is performing RTH or auto landing, press once to exit RTH.
Press and hold the brake button until the motion controller beeps to indicate that RTH has started. Press the
button again to cancel RTH and regain control of the aircraft.
If the aircraft brakes and hovers, the zero attitude may need to be reset before the flight can resume.
Mode Button
Press once to switch between Normal and Sport mode. The current mode is displayed in the goggles.
Motion Controller Alert
The motion controller sounds an alert during RTH. The alert cannot be cancelled.
The motion controller sounds an alert when the battery level is 6% to 15%. A low battery level alert can be
cancelled by pressing the power button. A critical battery level alert will sound when the battery level is less
than 5% and cannot be cancelled.
